Video & projection
Blackmagic SmartView / MultiView monitors troubleshooting
The Blackmagic SmartView / MultiView monitors problems live-event techs bring to Ask Roadie most (also called MultiView 16, MultiView 4, SmartScope, SmartView). Pick your symptom, or describe your own in plain words, and get the likeliest fix first, with the manual page when there is one.
Common SmartView / MultiView monitors errors & problems
What techs run into most, and what's usually behind it. The step-by-step fix for your exact unit is in Ask Roadie.
- Step-by-step fixGet the fix →
Can I power the MultiView 4 HD without a DC brick?
Likely cause: Manufacturer states MultiView 4 HD supports 48V PoE+; general practice on PoE+ vs passive.
- Step-by-step fixGet the fix →
How do I get the SmartView 4K G3 onto a SMPTE-2110 IP network?
Likely cause: Blackmagic SmartView 4K G3 IP video compliance spec sheet.
- Step-by-step fixGet the fix →
What are the MultiView 16 / MultiView 4 HD specs?
Likely cause: Blackmagic official MultiView tech specs / product pages.
- Step-by-step fixGet the fix →
What are the SmartView 4K G3 specs (I/O, power, size)?
Likely cause: Blackmagic official SmartView 4K G3 tech spec sheet.
Not on the list? Describe it your way, or paste the error code off the display. Ask Roadie works the problem with you until it's fixed or you have a clear next move.
How Ask Roadie helps with the SmartView / MultiView monitors
- 1. Pick the Blackmagic SmartView / MultiView monitors. It's already in the list.
- 2. Describe what you're seeing. In your own words, or the error code off the screen.
- 3. Get the likeliest fix first. Steps in order, the manual page when there is one, and a note when other techs have confirmed it.
- 4. Still broken? Tap 👎 and it keeps going from where you left off.
Free trial
Get your SmartView / MultiView monitors back up before doors.
Try it free. No card required.
Start free trial →