Lighting
Blizzard Lighting Blok 1 IP troubleshooting
The Blizzard Lighting Blok 1 IP problems live-event techs bring to Ask Roadie most (also called 123760, Blizzard Blok 1 IP, Blok 1, blok-1-ip). Pick your symptom, or describe your own in plain words, and get the likeliest fix first, with the manual page when there is one.
Common Blok 1 IP errors & problems
What techs run into most, and what's usually behind it. The step-by-step fix for your exact unit is in Ask Roadie.
- Step-by-step fixGet the fix →
Blok 1 IP buttons don't work / control panel locked
Likely cause: Lock prevents accidental touch-button triggering on the touch-sensitive panel.
- Step-by-step fixGet the fix →
Blok 1 IP dim / brightness keeps dropping
Likely cause: Calibration, battery-saver and thermal protection all cap output independently of DMX level.
- Step-by-step fixGet the fix →
Blok 1 IP factory reset
Likely cause: ST L deliberately preserves address and user content, so re-check ADDR yourself after a reset.
- Step-by-step fixGet the fix →
Blok 1 IP not picking up wireless DMX / status LED flashing red
Likely cause: Receiver must be on the same protocol and group as the transmitter; W-DMX needs no group.
- Step-by-step fixGet the fix →
Blok 1 IP not responding or acting erratic on DMX
Likely cause: Mode mismatch is the usual cause - e.g.
Not on the list? Describe it your way, or paste the error code off the display. Ask Roadie works the problem with you until it's fixed or you have a clear next move.
How Ask Roadie helps with the Blok 1 IP
- 1. Pick the Blizzard Lighting Blok 1 IP. It's already in the list.
- 2. Describe what you're seeing. In your own words, or the error code off the screen.
- 3. Get the likeliest fix first. Steps in order, the manual page when there is one, and a note when other techs have confirmed it.
- 4. Still broken? Tap 👎 and it keeps going from where you left off.