Scenic & effects
Blizzard Lighting Big Bad Lo-Fo troubleshooting
The Blizzard Lighting Big Bad Lo-Fo problems live-event techs bring to Ask Roadie most (also called 123767, AtmosFEAR Big Bad Lo Fo, BBLF, Big Bad Lo Fo). Pick your symptom, or describe your own in plain words, and get the likeliest fix first, with the manual page when there is one.
Common Big Bad Lo-Fo errors & problems
What techs run into most, and what's usually behind it. The step-by-step fix for your exact unit is in Ask Roadie.
- Step-by-step fixGet the fix →
Big Bad Lo Fo fault icon on the display (sensor / heater / lack of fluid / remote)
Likely cause: Sensor and heater faults are internal hardware faults; only fluid level is user-correctable.
- Step-by-step fixGet the fix →
Big Bad Lo Fo fog is sporadic or rising instead of staying low
Likely cause: The ultrasonic atomizer disks need the right water depth over them to make dense, chilled low-lying fog.
- Step-by-step fixGet the fix →
Big Bad Lo Fo no fog after power on / not ready
Likely cause: The unit won't emit until warm-up completes, and it needs both water and fluid.
- Step-by-step fixGet the fix →
Big Bad Lo Fo not responding to DMX / front panel stopped working
Likely cause: DMX overrides the local modes, and fog only fires when Ch1 is in the upper half.
- Step-by-step fixGet the fix →
Big Bad Lo Fo output weak / nozzle clogged / cleaning
Likely cause: Fluid residue builds up in the nozzle and fluid path; the vinegar flush dissolves it.
- Step-by-step fixGet the fix →
Big Bad Lo Fo overheating / placement and ventilation
Likely cause: Blocked intakes or high ambient temperature cut chilling and output and stress the unit.
- Step-by-step fixGet the fix →
Big Bad Lo Fo spec mismatch: weight, size and output differ between manual and website
Likely cause: Using the conservative numbers avoids under-planning for weight and coverage.
- Step-by-step fixGet the fix →
Big Bad Lo Fo timer mode not working / interval and duration settings
Likely cause: The timer only runs with no DMX connected and both values set to non-zero.
- Step-by-step fixGet the fix →
Big Bad Lo Fo tripping breaker / blowing fuse / what circuit does it need
Likely cause: A 2 kW load shared with other gear, or fed from a dimmer, overloads the circuit or damages the unit.
Not on the list? Describe it your way, or paste the error code off the display. Ask Roadie works the problem with you until it's fixed or you have a clear next move.
How Ask Roadie helps with the Big Bad Lo-Fo
- 1. Pick the Blizzard Lighting Big Bad Lo-Fo. It's already in the list.
- 2. Describe what you're seeing. In your own words, or the error code off the screen.
- 3. Get the likeliest fix first. Steps in order, the manual page when there is one, and a note when other techs have confirmed it.
- 4. Still broken? Tap 👎 and it keeps going from where you left off.
Free trial
Get your Big Bad Lo-Fo back up before doors.
Try it free. No card required.
Start free trial →