Lighting
Blizzard Lighting Blok 4 IP troubleshooting
The Blizzard Lighting Blok 4 IP problems live-event techs bring to Ask Roadie most (also called 123762, Blizzard Blok 4 IP, blok-4-ip, Blok4 IP). Pick your symptom, or describe your own in plain words, and get the likeliest fix first, with the manual page when there is one.
Common Blok 4 IP errors & problems
What techs run into most, and what's usually behind it. The step-by-step fix for your exact unit is in Ask Roadie.
- Step-by-step fixGet the fix →
Blok 4 IP dim / output dropping / shuts off
Likely cause: Battery-saver, calibration and thermal protection each cap output independently of DMX.
- Step-by-step fixGet the fix →
Blok 4 IP locked buttons / factory reset / firmware version
Likely cause: ST L keeps the address, so re-check ADDR yourself.
- Step-by-step fixGet the fix →
Blok 4 IP no response on wired DMX
Likely cause: With SIGN on 2.4G the XLR input is ignored.
- Step-by-step fixGet the fix →
Blok 4 IP only one head responds / colours on wrong faders
Likely cause: Mixing up the two 11-channel modes, or using a single-group profile, is the classic Blok 4 IP patch error.
- Step-by-step fixGet the fix →
Blok 4 IP won't link to wireless DMX / LED flashing red
Likely cause: Protocol, group and input selector must all match the transmitter.
Not on the list? Describe it your way, or paste the error code off the display. Ask Roadie works the problem with you until it's fixed or you have a clear next move.
How Ask Roadie helps with the Blok 4 IP
- 1. Pick the Blizzard Lighting Blok 4 IP. It's already in the list.
- 2. Describe what you're seeing. In your own words, or the error code off the screen.
- 3. Get the likeliest fix first. Steps in order, the manual page when there is one, and a note when other techs have confirmed it.
- 4. Still broken? Tap 👎 and it keeps going from where you left off.