Lighting
Elation Fuze Pendant troubleshooting
The Elation Fuze Pendant problems live-event techs bring to Ask Roadie most (also called Fuze Pendant CW). Pick your symptom, or describe your own in plain words, and get the likeliest fix first, with the manual page when there is one.
Common Fuze Pendant errors & problems
What techs run into most, and what's usually behind it. The step-by-step fix for your exact unit is in Ask Roadie.
- Step-by-step fixGet the fix →
Choosing the right DMX profile / channel mode
Likely cause: Fixture footprint ranges 1-17 channels depending on profile; matching mode on fixture and console is required for correct channel mapping.
- Step-by-step fixGet the fix →
Configure fixture remotely (no ladder access)
Likely cause: Fixture is RDM-compliant, so profile and address can be set over the DMX line without physically reaching the menu.
- Step-by-step fixGet the fix →
Flicker or dropouts that are not camera-related
Likely cause: Most non-PWM flicker is signal integrity (reflections/noise from missing termination or bad cable); standalone mode isolates fixture vs.
- Step-by-step fixGet the fix →
Need a different beam angle / coverage
Likely cause: Interchangeable field lenses set the beam/field spread; choose based on mounting height and desired pool size.
- Step-by-step fixGet the fix →
Need to set the DMX address / fixture not responding to console
Likely cause: The Fuze Pendant addresses locally via the OLED menu or remotely via RDM; a mismatch between the selected DMX profile and the console patch is the usual cause of no/partial response.
- Step-by-step fixGet the fix →
Retrofit into an existing 0-10V architectural dimming system
Likely cause: The Pendant is designed as a fluorescent/architectural retrofit; 0-10V drives intensity only while CT/color come from the standalone presets.
- Step-by-step fixGet the fix →
Slight jump-to-black at end of a fade / dimming not smooth
Likely cause: Different dimming curves change low-end resolution and how the last few percent are rendered, smoothing perceived fade-outs.
- Step-by-step fixGet the fix →
Visible flicker on camera / in broadcast
Likely cause: Camera flicker is a PWM/shutter beat; raising the refresh rate above the camera capture rate removes visible banding.
Not on the list? Describe it your way, or paste the error code off the display. Ask Roadie works the problem with you until it's fixed or you have a clear next move.
How Ask Roadie helps with the Fuze Pendant
- 1. Pick the Elation Fuze Pendant. It's already in the list.
- 2. Describe what you're seeing. In your own words, or the error code off the screen.
- 3. Get the likeliest fix first. Steps in order, the manual page when there is one, and a note when other techs have confirmed it.
- 4. Still broken? Tap 👎 and it keeps going from where you left off.
Free trial
Get your Fuze Pendant back up before doors.
Try it free. No card required.
Start free trial →